Ntuziaka njikwa Sistemu Wim

Wim System Control Instructions

Nkọwa dị mkpirikpi:


Nkọwa ngwaahịa

Mkpado ngwaahịa

Nchịkọta Sistemu

Enviko quartz dynamic thing system adopts Windows 7 agbakwunyere sistemụ arụmọrụ, PC104 + ụgbọ ala extendable ụgbọ ala na mbara okpomọkụ larịị components.Ihe mejupụtara sistemu a bụ ihe njikwa, ihe nkwuputa chaja na njikwa IO.Usoro ahụ na-anakọta data nke ihe mmetụta dị ike (quartz na piezoelectric), eriri ihe mmetụta ala (ihe nchọpụta njedebe laser), ihe nchọpụta axle na ihe mmetụta okpomọkụ, ma hazie ha n'ime ozi ụgbọ ala zuru oke na ozi na-atụ, gụnyere ụdị axle, nọmba axle, wheelbase, taya. nọmba, axle arọ, axle otu arọ, ngụkọta arọ, overrun ọnụego, ọsọ, okpomọkụ, wdg Ọ na-akwado mpụga ụgbọala ụdị nchọpụta na axle identifier, na usoro na-akpaghị aka dakọtara na-etolite a zuru ezu ozi data bulite ma ọ bụ nchekwa na ụgbọ ụdị. njirimara.

Sistemu na-akwado ọtụtụ ụdị ihe mmetụta.Enwere ike ịtọ ọnụọgụ nke sensọ dị n'okporo ụzọ ọ bụla site na 2 ruo 16. Igwe ọkụ ọkụ na sistemụ na-akwado ihe mmetụta mbubata, ụlọ na ngwakọ.Usoro ahụ na-akwado ọnọdụ IO ma ọ bụ ọnọdụ netwọk iji kpalite ọrụ ijide igwefoto, na usoro ahụ na-akwado njikwa mmepụta ihe n'ihu, n'ihu, ọdụ na ọdụ.

Usoro ahụ nwere ọrụ nke nchọpụta steeti, usoro ahụ nwere ike ịchọpụta ọnọdụ nke isi ngwá ọrụ ozugbo, ma nwee ike ịrụzi ozugbo na bulite ozi ma ọ bụrụ na ọnọdụ ndị na-adịghị mma;usoro ahụ nwere ọrụ nke cache data akpaka, nke nwere ike ịchekwa data nke ụgbọ ala achọpụtara ihe dị ka ọkara afọ;usoro ahụ nwere ọrụ nke nlekota oru anya, Nkwado desktọpụ dịpụrụ adịpụ, Radmin na ọrụ ndị ọzọ dịpụrụ adịpụ, na-akwado nrụpụta ike-apụ;Sistemu ahụ na-eji ụzọ nchekwa dị iche iche, gụnyere nkwado WDT ọkwa atọ, nchekwa sistemu FBWF, sọftụwia na-agwọta sistemụ, wdg.

Usoro nka

ike AC220V 50Hz
oke ọsọ 0.5km / h100km/h
nkewa ire ere d = 50kg
axle ndidi ± 10% ọsọ ọsọ
ọkwa ziri ezi ụgbọ ala Klas 5, klaasị 10, klaasị 2(0.5km / h20km/h)
Izi ezi nkewa ụgbọ ala ≥99%
Ọnụego njirimara ụgbọ ala ≥98%
axle ibu nso 0,5t40t
Ụzọ nhazi uzo 5
Ọwa sensọ Ọwa 32, ma ọ bụ ruo ọwa 64
Nhazi ihe mmetụta Na-akwado ọtụtụ ụdị nhazi ihe mmetụta, ụzọ ọ bụla dị ka 2pcs ma ọ bụ 16pcs sensọ izipu, na-akwado ụdị mmetụta nrụgide dị iche iche.
Mkpate igwefoto 16channel DO dịpụrụ adịpụ mmepụta ịkpalite ma ọ bụ ọnọdụ ịkpalite netwọkụ
Nchọpụta na-agwụcha Ntinye ikewapụ 16channel DI jikọọ akara eriri igwe, ọnọdụ nchọpụta njedebe laser ma ọ bụ ọnọdụ njedebe akpaaka.
Akụrụngwa sistemụ Sistemụ arụmọrụ agbakwunyere WIN7
Nweta njirimara Axle Na-akwado ụdị njirimara wheel axle dị iche iche (quartz, infrared photoelectric, nkịtị) iji mepụta ozi ụgbọ ala zuru oke.
Nweta ụdị ụgbọ ala ọ na-akwado usoro njirimara ụdị ụgbọ ala ma mepụta ozi ụgbọ ala zuru oke na ogologo, obosara na data dị elu.
Kwado nchọpụta bidirectional Kwado n'ihu ma tụgharịa nchọpụta bidirectional.
Ngwa ngwa VGA interface, netwọk netwọk, USB interface, RS232, wdg
Nchọpụta na nlekota steeti Nchọpụta ọnọdụ: sistemu ahụ na-achọpụta ọkwa nke ngwa akụrụngwa ozugbo, ma nwee ike rụkwaa ma bulite ozi ozugbo ma ọ bụrụ na ọnọdụ adịghị mma.
  Nleba anya n'ime anya: na-akwado desktọpụ dịpụrụ adịpụ, Radmin na arụmọrụ ndị ọzọ dịpụrụ adịpụ, na-akwado nrụpụta mgbanyụ ọkụ dịpụrụ adịpụ.
Nchekwa data Ọkụ diski steeti siri ike sara mbara, nchekwa data nkwado, ịde osisi, wdg.
Nchekwa sistemu Nkwado WDT ọkwa atọ, nchekwa sistemu FBWF, sọftụwia na-agwọta sistemụ.
gburugburu ngwaike sistemu Nnukwu ụlọ ọrụ mmepụta ihe okpomọkụ
Usoro njikwa okpomọkụ Ngwá ọrụ ahụ nwere usoro njikwa okpomọkụ nke ya, nke nwere ike nyochaa ọnọdụ okpomọkụ nke akụrụngwa ozugbo ma na-achịkwa mmalite fan na nkwụsị nke kabinet.
Jiri gburugburu ebe obibi (ichepụta okpomọkụ sara mbara) Okpomọkụ ọrụ: - 40 ~ 85 ℃
  Iru mmiri dị ala: ≤ 85% RH
  Oge ikpo ọkụ: ≤ 1 nkeji

Ngwa ngwa

WIM SYSTEM CONTROL INSTRUCTIONS (7)

1.2.1 usoro akụrụngwa njikọ
Akụrụngwa sistemu bụ onye na-ahụ maka sistemụ, ihe nkwuputa ụgwọ na njikwa ntinye / mmepụta IO

product (1)

1.2.2 sistemụ njikwa interface
Onye na-ahụ maka sistemụ nwere ike jikọọ amplifiers chaja 3 na njikwa IO 1, yana 3 rs232/rs465, 4 USB na interface netwọkụ 1.

product (3)

1.2.1 amplifier interface
Igwe ọkụ ọkụ na-akwado 4, 8, 12 ọwa (nhọrọ) ntinye ihe mmetụta, mmepụta interface DB15, na voltaji na-arụ ọrụ bụ DC12V.

product (2)

1.2.1 I / O interface njikwa
Ntinye IO na njikwa mmepụta, yana ntinye dịpụrụ adịpụ 16, mmepụta iche iche 16, DB37 mmepụta interface, Voltage DC12V na-arụ ọrụ.

nhazi usoro

Nhazi ihe mmetụta 2.1
Ọ na-akwado ọtụtụ ụdị nhazi ihe mmetụta dị ka 2, 4, 6, 8 na 10 kwa ụzọ, na-akwado ruo ụzọ 5, ntinye ihe mmetụta 32 (nke nwere ike ịgbasa na 64), ma na-akwado n'ihu na tụgharịa ụzọ nchọpụta ụzọ abụọ.

WIM SYSTEM CONTROL INSTRUCTIONS (9)
WIM SYSTEM CONTROL INSTRUCTIONS (13)

Njikọ njikwa DI

Ọwa 16 nke ntinye dịpụrụ adịpụ DI, na-akwado njikwa eriri igwe, onye na-achọpụta laser na akụrụngwa mmecha ndị ọzọ, na-akwado ọnọdụ Di dị ka optocoupler ma ọ bụ ntinye agbagharị.Ntuziaka na-aga n'ihu na ntụgharị nke ụzọ ọ bụla na-ekekọrịta otu ngwaọrụ njedebe, na interface ahụ ka akọwara dị ka ndị a;

Ụzọ nkwụsị     Nọmba ọdụ ụgbọ mmiri DI            ndetu
  Enweghị ụzọ 1 (n'ihu, tụgharịa)    1+,1- Ọ bụrụ na ngwaọrụ njikwa njedebe bụ mmepụta optocoupler, mgbaàmà ngwaọrụ agwụ kwesịrị ịdekọ na + na - akara nke njikwa IO otu otu.
   Enweghị ụzọ abụọ (n'ihu, tụgharịa)    2+,2-  
  Enweghị ụzọ 3 (n'ihu, tụgharịa)    3+,3-  
   Enweghị ụzọ 4 (n'ihu, tụgharịa)    4+,4-  
  Enweghị ụzọ 5 (n'ihu, tụgharịa)    5+,5-

Ejikwa njikọ

Ọwa 16 na-eme mmepụta dịpụrụ adịpụ, nke a na-eji ejikwa njikwa mkpanaaka nke igwefoto, ihe nkwado ọkwa na-akpata na ọdịda ọdịda ọnọdụ.Sistemu n'onwe ya na-akwado ọnọdụ mbugharị na ntụgharị azụ.Mgbe a na-ahazi njedebe njikwa akpalite, ọnọdụ ntụgharị adịghị mkpa ka ahazi ya, na usoro ahụ na-agbanwe na-akpaghị aka.A kọwapụtara interface dị ka ndị a:

Nọmba okporo ụzọ  Mkpalite aga n'ihu Mkpalite ọdụ Ntụnye ntụziaka akụkụ Ntugharị akụkụ ọdụ ọdụ           Rịba ama
Ụzọ No1 (n'ihu) 1+,1- 6+,6-  11+,11- 12+,12- Ọgwụgwụ njikwa mkpalite nke igwefoto nwere njedebe + -.Nkwụsị njikwa mkpalite igwefoto na akara + - nke njikwa IO kwesịrị ịdekọrịta otu otu.
Ụzọ No2(n'ihu) 2+,2- 7+,7-      
Ụzọ No3 (n'ihu) 3+,3- 8+,8-      
Ụzọ No4(n'ihu) 4+,4- 9+,9-      
Ụzọ No5 (n'ihu) 5+,5- 10+,10-      
Ụzọ No1(ntụgharị) 6+,6- 1+,1- 12+,12- 11+,11-

usoro ojiji ndu

3.1 Nke mbu
Nkwadebe tupu ntọala ngwá ọrụ.
3.1.1 setịpụrụ Radmin
1) Lelee ma arụnyere ihe nkesa Radmin na ngwá ọrụ (sistemụ ngwá ọrụ).Ọ bụrụ na ọ na-efu, biko tinye ya
WIM SYSTEM CONTROL INSTRUCTIONS (1)
2) Tọọ Radmin, tinye akaụntụ na paswọọdụ
WIM SYSTEM CONTROL INSTRUCTIONS (4)
WIM SYSTEM CONTROL INSTRUCTIONS (48)WIM SYSTEM CONTROL INSTRUCTIONS (47)WIM SYSTEM CONTROL INSTRUCTIONS (8)
3.1.2 usoro nchekwa diski
1) Na-agba ọsọ ntuziaka CMD ịbanye na gburugburu DOS.
WIM SYSTEM CONTROL INSTRUCTIONS (11)
2) Ajụjụ EWF ọkwa nchebe (ụdị EWFMGR C: tinye)
(1) N'oge a, ọrụ nchebe EWF dị (State = ENABLE)
WIM SYSTEM CONTROL INSTRUCTIONS (44)
(Ụdị EWFMGR c: -communanddisable -live enter), na steeti nwere nkwarụ iji gosi na EWF nchebe agbanyụrụ.
(2) N'oge a, ọrụ nchebe EWF na-emechi (steeti = gbanyụọ), ọ dịghị ọrụ ọzọ achọrọ.
WIM SYSTEM CONTROL INSTRUCTIONS (10)
(3) Mgbe ịgbanwere ntọala sistemụ, tọọ EWF ka ọ rụọ ọrụ
WIM SYSTEM CONTROL INSTRUCTIONS (44)
3.1.3 Mepụta ụzọ mkpirisi mmalite akpaaka
1) Mepụta ụzọ mkpirisi iji na-agba ọsọ.
WIM SYSTEM CONTROL INSTRUCTIONS (12)WIM SYSTEM CONTROL INSTRUCTIONS (18)
WIM SYSTEM CONTROL INSTRUCTIONS (15)
WIM SYSTEM CONTROL INSTRUCTIONS (16)
WIM SYSTEM CONTROL INSTRUCTIONS (19)
WIM SYSTEM CONTROL INSTRUCTIONS (20)
WIM SYSTEM CONTROL INSTRUCTIONS (21)
WIM SYSTEM CONTROL INSTRUCTIONS (22)
WIM SYSTEM CONTROL INSTRUCTIONS (23)

3.2 Okwu mmalite nke interface interface
WIM SYSTEM CONTROL INSTRUCTIONS (25)

3.3 Ntọala oke sistemụ
3.3.1 Sistemụ ntọala oke mbido.
(1) Tinye igbe okwu ntọala sistemụ

WIM SYSTEM CONTROL INSTRUCTIONS (26)

(2) Ịtọ ntọala

WIM SYSTEM CONTROL INSTRUCTIONS (32)

a. Tọọ mkpokọta nha nha ka 100
WIM SYSTEM CONTROL INSTRUCTIONS (28)
b. Tọọ nọmba IP na ọdụ ụgbọ mmiri
WIM SYSTEM CONTROL INSTRUCTIONS (29)
c. Tọọ ọnụego nlele na ọwa
WIM SYSTEM CONTROL INSTRUCTIONS (30)
Mara: mgbe ị na-emelite mmemme, biko debe ọnụego nlele na ọwa kwekọrọ na mmemme izizi.
d.Parameter ntọala nke ihe mmetụta mapụtara
WIM SYSTEM CONTROL INSTRUCTIONS (39)
4. Tinye nhazi nhazi
WIM SYSTEM CONTROL INSTRUCTIONS (39)
WIM SYSTEM CONTROL INSTRUCTIONS (38)
5.Mgbe ụgbọ ala na-agafe mpaghara ihe mmetụta n'otu n'otu (ọsọ a na-atụ aro bụ 10 ~ 15km / h), usoro ahụ na-emepụta paramita dị arọ ọhụrụ.
6.Reload ọhụrụ arọ parameters.
(1)Tinye ntọala sistemụ.
WIM SYSTEM CONTROL INSTRUCTIONS (40)
(2) Pịa Chekwa ka ịpụ.WIM SYSTEM CONTROL INSTRUCTIONS (41)
5. Ọma n'iji ya gee ntị nke usoro parameters
Dị ka ịdị arọ nke ihe mmetụta ọ bụla na-emepụta mgbe ụgbọ ala ọkọlọtọ na-agafe na usoro ahụ, a na-eji aka na-edozi ihe dị arọ nke ihe mmetụta ọ bụla.
1. Tọọ usoro.
WIM SYSTEM CONTROL INSTRUCTIONS (40)
2.Adjust kwekọrọ K-factor dị ka ụgbọ ala mode nke ụgbọ ala.
Ha na-aga n'ihu, ọwa obe, reverse na ultra-low speed parameters.
WIM SYSTEM CONTROL INSTRUCTIONS (42)
6.System nchọpụta paramita ntọala
Tọọ paramita dabara adaba dị ka achọrọ nchọpụta sistemu siri dị.
WIM SYSTEM CONTROL INSTRUCTIONS (46)

Usoro nkwukọrịta usoro

Ụdị nzikọrịta ozi TCPIP, nlele usoro XML maka nnyefe data.

  1. Ịbanye ụgbọ ala: a na-ezigara ngwá ọrụ ahụ na igwe dabara adaba, igwe na-ejikọta ya anaghị azaghachi.
Isi nchọpụta Ogologo ahụ data (ederede 8-byte gbanwere ka ọ bụrụ integer) Ahụ data (eriri XML)
DCYW

Deviceno=Ngwaọrụ nọmba

roadno=Okporo uzo mba

recno= Nọmba nsoghe data

/>

 

  1. Ịpụ ụgbọ ala: a na-ezigara ngwá ọrụ ahụ na igwe na-ejikọta ya, igwe na-ejikọta ya anaghị azaghachi
isi (ederede 8-byte gbanwere ka ọ bụrụ integer) Ahụ data (eriri XML)
DCYW

Deviceno=Ngwaọrụ nọmba

roadno=Okporo ụzọ Mba

recno=Oghere Usoro data

/>

 

  1. Nbulite data dị arọ: a na-ezigara ngwá ọrụ ahụ na igwe dabara adaba, igwe na-ejikọta ya anaghị azaghachi.
isi (ederede 8-byte gbanwere ka ọ bụrụ integer) Ahụ data (eriri XML)
DCYW

ngwaọrụ =Nọmba akụrụngwa

okporo ụzọ mba:

recno= Nọmba nsoghe data

kroadno=Gafere akara okporo ụzọ;agafela ụzọ iji dejupụta 0

ọsọ = ọsọ;Otu kilomita kwa elekere

ibu =ngụkọta arọ: nkeji: kg

axlecount=Ọnụ ọgụgụ nke anyụike;

okpomọkụ =okpomọkụ;

maxdistance= Ebe dị n'etiti axis mbụ na axis ikpeazụ, na millimeters

axlestruct= Nhazi nke axle: ọmụmaatụ, 1-22 pụtara otu taya n'akụkụ nke ọ bụla nke mbụ axle, taya abụọ n'akụkụ nke ọ bụla nke axle nke abụọ, taya abụọ n'akụkụ nke ọ bụla nke axle nke atọ, na nke abụọ na axle nke atọ. ejikọrọ

weightstruct = Ọdịdị arọ: dịka ọmụmaatụ, 4000809000 pụtara 4000kg maka axle mbụ, 8000kg maka axle nke abụọ na 9000kg maka axle nke atọ.

distancestruct= Ọdịdị dị anya: dịka ọmụmaatụ, 40008000 pụtara na anya dị n'etiti axis mbụ na axis nke abụọ bụ 4000 mm, na anya n'etiti axis nke abụọ na nke atọ bụ 8000 mm.

diff1=2000 bụ millisecond dị iche n'etiti data arọ dị na ụgbọ ala na ihe mmetụta nrụgide mbụ

diff2=1000 bụ ọdịiche millisecond n'etiti data arọ dị na ụgbọ ala na njedebe

ogologo = 18000;ogologo ụgbọ ala;mm

obosara=2500;obosara ụgbọ ala;nkeji: mm

elu=3500;elu ụgbọ ala;nkeji mm

/>

 

  1. Ọnọdụ akụrụngwa: a na-ezigara ngwá ọrụ ahụ na igwe na-ejikọta ya, igwe na-ejikọta ya anaghị azaghachi.
Isi (ederede 8-byte gbanwere ka ọ bụrụ integer) Ahụ data (eriri XML)
DCYW

Deviceno=Ngwaọrụ nọmba

code=”0” Koodu ọnọdụ, 0 na-egosi nkịtị, ụkpụrụ ndị ọzọ na-egosi adịghị mma

msg=”” Nkọwa steeti

/>

 


  • Nke gara aga:
  • Osote:

  • Ngwaahịa ndị emetụtara